Online Certification Course

Learn How to Design a Press Tool with Catia V5

Master Trainer

Master Trainer

Prasannakumar Shankar

▪ 20+ years of experience in providing mechanical engineering services to OEM’s & tier suppliers in aerospace, automotive, construction & mining domains. ▪ Subject matter expert in the areas of mechanical product design, manufacturing tooling design, manufacturing engineering & industrialization. ▪ Worked as design consultant for National & Intentional companies ▪ A passionate technical trainer If you have any questions, Call Me: +91-8277-8288-33

Course curriculum

  • 2

    2) The Strip Layout Design

    • 2.1) The General Tolerances as per IS 2102

    • 2.2) What is a Strip Layout ?

    • 2.3) The Design Process - Strip Layout

    • 2.4) Step 1 - Strip Layout Design - Check Material Availability

    • 2.5) Step 2 - Strip Layout Design - Punch & Die Dimensions

    • 2.6) Step 3 - Strip Layout Design - Bridge Dimensions

    • 2.7) Sheet Metal Slitting

    • 2.8) LMC & MMC

    • 2.9) Step 4 - Strip Layout Design - Pitch Dimensions

    • 2.10) Step 5 - Strip Layout Design - Utilization Calculations

    • 2.11) Step 6 - Strip Layout Design - Drawing Creation

    • 2.12) 3D Design of Strip Layout using Catia V5

  • 3

    3) Shear Force & Press Tonnage Calculations

    • 3.1) Shear Force Calculations

    • 3.2) Press Tonnage Calculations

    • 3.3) Press Selection & Specifications

  • 4

    4) How to Design a Die Plate with Catia V5 ?

    • 4.1) Create a Die Plate with Die Opening using Catia V5

    • 4.2) Create a Draft as Die Relief

    • 4.3) Calculate the Thickness of Die Plate

    • 4.4) About Screws & Dowels

    • 4.5) Create Screws & Dowel Holes on Die Plate

  • 5

    5) How to Create Die Assembly in Catia V5 ?

    • 5.1) How to Create Die Assembly in Catia V5 ?

  • 6

    6) Strip Guide, Strip Support & Locator Design in Catia V5

    • 6.1) Chapter Introduction

    • 6.2) Design of the Rear/Back Strip Guide Plate in Catia V5

    • 6.3) Design of the Front Strip Guide Plate in Catia V5

    • 6.4) Design of Strip Support Plate in Catia V5

    • 6.5) Add Fastener holes to Die Plate for mounting Strip Guide Plates in Catia V5

    • 6.6) Design of Locator Pin in Catia V5

  • 7

    7) Design of Strip Pusher in Catia V5

    • 7.1) Chapter Introduction

    • 7.2) Design of Shoulder Bolt in Catia V5

    • 7.3) Design of Strip Pusher in Catia V5

    • 7.4) Spring Design in Catia V5

  • 8

    8) Design of Die Back Plate in Catia V5

    • 8.1) Design of Die Back Plate in Catia V5

  • 9

    9) Design of Die Shoe in Catia V5

    • 9.1) Design of Die Shoe in Catia V5

  • 10

    10) Design of Blanking Punch in Catia V5

    • 10.1) Design of Blanking Punch in Catia V5

  • 11

    11) Create Punch & Press Tool Assembly in Catia V5

    • 11.1) Create Punch & Press Tool Assembly in Catia V5

  • 12

    12) Design Punch Holder in Catia V5

    • 12.1) Design Punch Holder in Catia V5

  • 13

    13) Design of Punch Back Plate in Catia V5

    • 13.1) Design of Punch Back Plate in Catia V5

  • 14

    14) Design of Top Plate in Catia V5

    • 14.1) Design of Top Plate in Catia V5

  • 15

    15) Design of Stripper Plate using Catia V5

    • 15.1) Chapter Introduction - Design of Stripper Plate

    • 15.2) Design the Stripper Plate with Shape Opening

    • 15.3) Adjust the Die Height in Catia V5

    • 15.4) Design Calculations of Stripper Plate

    • 15.5) Spring Design Calculations

    • 15.6) Spring Design in Catia V5

    • 15.7) Precision Shoulder Bolt Design in Catia V5

    • 15.8) Update the Design of Stripper Plate

    • 15.9) Assemble the Shoulder Bolts & Springs

    • 15.10) Adjust the Length of Plates in Catia V5

    • 15.11) Create CBR Holes in Top Plate

  • 16

    16) Apply Screws and Dowels

    • 16.1) Chapter Introduction

    • 16.2) Apply Screws and Dowels to Die Assembly

    • 16.3) Apply Screws and Dowels to Punch Assembly

  • 17

    17) Design of Guide Pillar & Guide Bush in Catia V5

    • 17.1) Chapter Introduction

    • 17.2) Calculate the Pillar Length & Diameter

    • 17.3) Design of Guide Pillar in Catia V5

    • 17.4) Design of Guide Bush in Catia V5

  • 18

    18) Design of U-Slots for Clamping in Catia V5

    • 18.1) Design of U-Slots for Clamping in Catia V5

  • 20

    19) Design of Stroke End Block's in Catia V5

    • 19.1) Design of Stroke End Block's in Catia V5

  • 21

    20) Apply Material & Calculate Mass Properties

    • 20.1) Apply Material & Calculate Mass Properties

  • 22

    21) Properties, Parameters and BoM

    • 21.1) Add Properties and Parameters

    • 21.2) Analyze Bill of Material

FAQ's

1) How do I Learn?

* All lessons are pre-recorded videos. Once the course starts, the videos shall be released on daily basis. You can watch the videos any number of times

2) If I enroll for how many days will I have access to the course?

* You will have access to the course for 90 days from the start of the course / date of enrollment, whichever is later.

3) How much time should I spend every day?

* The duration of videos shall be 15 to 30 minutes per day. MaxTechEdu recommends, you to practice whatever you have learnt for a duration 1 hour every day. In total you might have to spend 1.5 hours per day

4) What should I do, If I have questions? Whom should I ask?

* Every lesson will have a discussion forum. You can ask your questions in the discussion forum. MaxTechEdu shall answer all your questions within 24 hours

5) Do I need a computer to learn this course?

* Not necessary. However, it is always better to practice what you have learnt. So, having access to a computer with Catia V5 installed is recommended.

6

* No.

7) Will there be a test / exam for this course?

* Yes. A test / quiz shall be conducted online. The test / quiz shall have multiple choice question (MCQs)

8) What will be the passing score to successfully complete this course?

* 60%

9) What happens if I am unable to score the passing marks

* You can re-take the test / quiz

10) Will I get a certificate after completing this course?

* Yes. A soft copy of the certificate shall be sent by e-mail after successful completion of the course

11) I don’t have a credit card. How do I pay?

* Pay using | Google Pay | PhonePe | Paytm | +91990028800312) I don’t have a credit card. How do I pay?

Mobile Number for Payment: 9900288003